Available in oil and latex formulas, these exterior paints are specially formulated to withstand rigid performance requirements for durability and service. Pigment ground into our barn paints makes them extremely color fast. Aluminum formula is also available
Latex Barn Paints
Our latex barn paint is extremely resistant to cracking, chipping, peeling, and blistering. These fast dry paints are formulated with premium quality latex resins and are lead free. For use on all properly prepared exterior wood surfaces.
- May be applied to slightly damp surfaces
- Fade resistant
- Exceptional hiding
- Ideal for most surfaces
- Soap and water cleanup
- Brush, roller, or spray application
- Lead free
- Flat or semi-gloss finish available
- Available in several popular colors Oil Base Barn Paints
- MSDS Information
Latex Specifications
- SURFACE PREPARATION:
For best results, all surfaces must be clean and dry, free of all grease, dirt, oil, and surface contaminants.
- APPLICATION:
Latex can be applied by nylon brush, roller or spray. Thin up to 15% if needed with clean water. Clean up tools and equipment immediately with warm, soapy water. - SPREAD RATE:
Coverage is approximately 400 square feet per gallon on smooth surfaces, 300 square feet per gallon on rough surfaces. - DRY TIME:
Latex paint dry time will be approximately 1 hour to touch and may be recoated in 6 hours under ideal drying conditions. Apply paint only when surface, air and paint temperatures are 50ºF - 90ºF.
Oil Base Barn Paints
Our oil base barn paint is formulated with premium quality alkyd resins. These fade resistant paints with a linseed oil base penetrate into the wood giving it added protection. For use on properly prepared wood buildings and fences
- Harmless to livestock when dry
- Excellent flow and leveling
- Soaks into wood
- Brush, roller, or spray application
- Lead Free
- Flat or semi-gloss finish available
- Available in several popular colors
- MSDS Information
Oil Specifications
- SURFACE PREPARATION:
For best results, all surfaces must be clean and dry, free of all grease, dirt, oil, and surface contaminants.
- APPLICATION:
Oil base can be applied by natural bristle brush, roller or spray. Use as is from container; do not thin. Clean equipment with paint thinner.
- SPREAD RATE:
Coverage is approximately 400 square feet per gallon on smooth surfaces, 300 square feet per gallon on rough surfaces. - DRY TIME:
Oil base paint dry time will be 24 hours to touch and may be recoated in 48 hours under ideal drying conditions.
Apply paint only when surface, air and paint temperatures are 50ºF - 90ºF.
